Problème de configuration multi-écrans sur Debian par jtruc34 - page 1

Alors :

J'ai une AMD Radeon HD 6950.

Pour ce qui est de l'installation, j'ai essayé :

en suivant toutes les informations du site de Debian,
en suivant la doc, mais en faisant aticonfig --initial,
en téléchargeant le pilote sur le site, et en l'installant directement, puis en créant un fichier de configuration Xorg,
et en faisant la même chose, mais à la place de créer le fichier de configuration Xorg, en utilisant aticonfig --initial.

Oui, et c'est justement après avoir redémarrer qu'il se passe ce qu'il se passe, quelle que soit la méthode d'installation des pilotes. Quant à la commande lsmod|grep radeon, elle n'affiche rien dans tous les cas (sauf si, évidemment, le blacklistage du pilote Radeon n'est pas activé), ce qui montre que le blacklistage est bien effectif.

Voici le fichier /var/log/Xorg.0.log :

[    15.059] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    15.059] X Protocol Version 11, Revision 0
[    15.059] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    15.059] Current Operating System: Linux jTruc34-PC 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64
[    15.059] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=5183cede-9f29-4b62-9c45-e14f9081d0b4 ro quiet
[    15.059] Build Date: 11 February 2015  12:32:02AM
[    15.059] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[    15.059] Current version of pixman: 0.32.6
[    15.059] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.059] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.059] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 22 19:51:41 2015
[    15.061] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.061] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.062] (==) No Layout section.  Using the first Screen section.
[    15.062] (==) No screen section available. Using defaults.
[    15.062] (**) |-->Screen "Default Screen Section" (0)
[    15.062] (**) |   |-->Monitor "<default monitor>"
[    15.062] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    15.062] (**) |   |-->Device "My GPU"
[    15.062] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.062] (==) Automatically adding devices
[    15.062] (==) Automatically enabling devices
[    15.062] (==) Automatically adding GPU devices
[    15.067] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.067] 	Entry deleted from font path.
[    15.068] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    15.068] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.068] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.068] (II) Loader magic: 0x7f049aea6d80
[    15.068] (II) Module ABI versions:
[    15.068] 	X.Org ANSI C Emulation: 0.4
[    15.068] 	X.Org Video Driver: 18.0
[    15.068] 	X.Org XInput driver : 21.0
[    15.068] 	X.Org Server Extension : 8.0
[    15.069] (--) PCI:*(0:1:0:0) 1002:6719:174b:e182 rev 0, Mem @ 0xe0000000/268435456, 0xf7e20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    15.069] (II) LoadModule: "glx"
[    15.070] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    15.071] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    15.071] 	compiled for 6.9.0, module version = 1.0.0
[    15.071] (II) LoadModule: "fglrx"
[    15.072] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    15.100] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    15.100] 	compiled for 1.4.99.906, module version = 14.20.7
[    15.100] 	Module class: X.Org Video Driver
[    15.100] (II) Loading sub module "fglrxdrm"
[    15.100] (II) LoadModule: "fglrxdrm"
[    15.101] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    15.101] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    15.101] 	compiled for 1.4.99.906, module version = 14.20.7
[    15.101] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[    15.101] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002         
[    15.101] (II) AMD Proprietary Linux Driver Build Date: Sep  2 2014 10:14:55
[    15.101] (++) using VT number 7

[    15.103] (WW) Falling back to old probe method for fglrx
[    15.107] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    15.108] ukiDynamicMajor: found major device number 251
[    15.109] (--) Assigning device section with no busID to primary device
[    15.109] (--) Chipset Supported AMD Graphics Processor (0x6719) found
[    15.110] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    15.110] (II) fglrx(0): pEnt->device->identifier=0x7f049c1faf60
[    15.110] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[    15.110] (II) Loading sub module "vgahw"
[    15.110] (II) LoadModule: "vgahw"
[    15.110] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    15.111] (II) Module vgahw: vendor="X.Org Foundation"
[    15.111] 	compiled for 1.16.4, module version = 0.1.0
[    15.111] 	ABI class: X.Org Video Driver, version 18.0
[    15.111] (II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    15.111] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    15.111] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    15.111] (==) fglrx(0): Default visual is TrueColor
[    15.111] (==) fglrx(0): RGB weight 888
[    15.111] (II) fglrx(0): Using 8 bits per RGB 
[    15.111] (==) fglrx(0): Buffer Tiling is ON
[    15.112] (II) Loading sub module "fglrxdrm"
[    15.112] (II) LoadModule: "fglrxdrm"
[    15.112] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    15.112] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    15.112] 	compiled for 1.4.99.906, module version = 14.20.7
[    15.112] ukiDynamicMajor: found major device number 251
[    15.112] ukiDynamicMajor: found major device number 251
[    15.112] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.112] ukiOpenDevice: node name is /dev/ati/card0
[    15.112] ukiOpenDevice: open result is 11, (OK)
[    15.494] ukiOpenByBusid: ukiOpenMinor returns 11
[    15.494] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.494] (**) fglrx(0): NoAccel = NO
[    15.494] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    15.494] (--) fglrx(0): Chipset: "AMD Radeon HD 6900 Series" (Chipset = 0x6719)
[    15.494] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe182)
[    15.494] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    15.494] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    15.494] (--) fglrx(0): MMIO registers at 0xf7e20000
[    15.494] (--) fglrx(0): I/O port at 0x0000e000
[    15.494] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    15.496] (II) fglrx(0): AC Adapter is used
[    15.497] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    15.497] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[    15.497] (II) fglrx(0): PCIE card detected
[    15.497] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    15.497] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    15.497] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf800000000, MCFBSize = 0x80000000)
[    15.497] (II) fglrx(0): RandR 1.2 support is enabled!
[    15.497] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    15.497] (II) Loading sub module "fb"
[    15.497] (II) LoadModule: "fb"
[    15.497] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.498] (II) Module fb: vendor="X.Org Foundation"
[    15.498] 	compiled for 1.16.4, module version = 1.0.0
[    15.498] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.498] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    15.498] (II) Loading sub module "ddc"
[    15.498] (II) LoadModule: "ddc"
[    15.498] (II) Module "ddc" already built-in
[    15.676] (II) fglrx(0): Output DFP1 has no monitor section
[    15.676] (II) fglrx(0): Output DFP2 has no monitor section
[    15.676] (II) fglrx(0): Output DFP3 has no monitor section
[    15.676] (II) fglrx(0): Output DFP4 has no monitor section
[    15.676] (II) fglrx(0): Output DFP5 has no monitor section
[    15.676] (II) fglrx(0): Output DFP6 has no monitor section
[    15.676] (II) fglrx(0): Output DFP7 has no monitor section
[    15.676] (II) fglrx(0): Output DFP8 has no monitor section
[    15.676] (II) fglrx(0): Output DFP9 has no monitor section
[    15.676] (II) fglrx(0): Output DFP10 has no monitor section
[    15.676] (II) fglrx(0): Output DFP11 has no monitor section
[    15.676] (II) fglrx(0): Output DFP12 has no monitor section
[    15.676] (II) fglrx(0): Output DFP13 has no monitor section
[    15.676] (II) fglrx(0): Output DFP14 has no monitor section
[    15.676] (II) fglrx(0): Output CRT1 has no monitor section
[    15.676] (II) Loading sub module "ddc"
[    15.676] (II) LoadModule: "ddc"
[    15.676] (II) Module "ddc" already built-in
[    15.676] (II) fglrx(0): Connected Display0: DFP9
[    15.676] (II) fglrx(0): Display0 EDID data ---------------------------
[    15.676] (II) fglrx(0): Manufacturer: ACR  Model: 75  Serial#: 2231704057
[    15.676] (II) fglrx(0): Year: 2008  Week: 50
[    15.676] (II) fglrx(0): EDID Version: 1.3
[    15.676] (II) fglrx(0): Digital Display Input
[    15.676] (II) fglrx(0): Max Image Size [cm]: horiz.: 44  vert.: 25
[    15.676] (II) fglrx(0): Gamma: 2.20
[    15.676] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.676] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.676] (II) fglrx(0): First detailed timing is preferred mode
[    15.676] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    15.676] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    15.676] (II) fglrx(0): Supported established timings:
[    15.676] (II) fglrx(0): 720x400@70Hz
[    15.676] (II) fglrx(0): 640x480@60Hz
[    15.676] (II) fglrx(0): 640x480@67Hz
[    15.676] (II) fglrx(0): 640x480@72Hz
[    15.676] (II) fglrx(0): 640x480@75Hz
[    15.676] (II) fglrx(0): 800x600@56Hz
[    15.676] (II) fglrx(0): 800x600@60Hz
[    15.676] (II) fglrx(0): 800x600@72Hz
[    15.676] (II) fglrx(0): 800x600@75Hz
[    15.676] (II) fglrx(0): 832x624@75Hz
[    15.676] (II) fglrx(0): 1024x768@60Hz
[    15.676] (II) fglrx(0): 1024x768@70Hz
[    15.676] (II) fglrx(0): 1024x768@75Hz
[    15.676] (II) fglrx(0): 1280x1024@75Hz
[    15.676] (II) fglrx(0): 1152x864@75Hz
[    15.676] (II) fglrx(0): Manufacturer's mask: 0
[    15.676] (II) fglrx(0): Supported standard timings:
[    15.676] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.676] (II) fglrx(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    15.676] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    15.676] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.676] (II) fglrx(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.676] (II) fglrx(0): #5: hsize: 1360  vsize 765  refresh: 60  vid: 49291
[    15.676] (II) fglrx(0): #6: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    15.676] (II) fglrx(0): #7: hsize: 1600  vsize 900  refresh: 75  vid: 53161
[    15.676] (II) fglrx(0): Supported detailed timing:
[    15.676] (II) fglrx(0): clock: 97.8 MHz   Image Size:  443 x 249 mm
[    15.676] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1760 h_border: 0
[    15.676] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 908 v_blanking: 926 v_border: 0
[    15.676] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 155 MHz
[    15.676] (II) fglrx(0): Monitor name: Acer X203H
[    15.676] (II) fglrx(0): Serial No: LEX040064330
[    15.676] (II) fglrx(0): EDID (in hex):
[    15.676] (II) fglrx(0): 	00ffffffffffff0004727500f9190585
[    15.676] (II) fglrx(0): 	32120103802c1978eaee95a3544c9926
[    15.676] (II) fglrx(0): 	0f5054bfef80714f81c0810081408180
[    15.676] (II) fglrx(0): 	8bc0a9c0a9cf2f2640a060841a303020
[    15.676] (II) fglrx(0): 	3500bbf91000001a000000fd00384b1f
[    15.676] (II) fglrx(0): 	530f000a202020202020000000fc0041
[    15.676] (II) fglrx(0): 	6365722058323033480a2020000000ff
[    15.676] (II) fglrx(0): 	004c45583034303036343333300a00dd
[    15.676] (II) fglrx(0): End of Display0 EDID data --------------------
[    15.676] (II) fglrx(0): Connected Display1: DFP13
[    15.676] (II) fglrx(0): Display1 EDID data ---------------------------
[    15.676] (II) fglrx(0): Manufacturer: ACR  Model: c  Serial#: 2171681936
[    15.676] (II) fglrx(0): Year: 2008  Week: 17
[    15.676] (II) fglrx(0): EDID Version: 1.3
[    15.676] (II) fglrx(0): Digital Display Input
[    15.676] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    15.676] (II) fglrx(0): Gamma: 2.20
[    15.676] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.676] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.676] (II) fglrx(0): First detailed timing is preferred mode
[    15.676] (II) fglrx(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    15.676] (II) fglrx(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    15.676] (II) fglrx(0): Supported established timings:
[    15.676] (II) fglrx(0): 720x400@70Hz
[    15.676] (II) fglrx(0): 640x480@60Hz
[    15.676] (II) fglrx(0): 640x480@67Hz
[    15.676] (II) fglrx(0): 640x480@72Hz
[    15.676] (II) fglrx(0): 640x480@75Hz
[    15.676] (II) fglrx(0): 800x600@56Hz
[    15.676] (II) fglrx(0): 800x600@60Hz
[    15.676] (II) fglrx(0): 800x600@72Hz
[    15.676] (II) fglrx(0): 800x600@75Hz
[    15.676] (II) fglrx(0): 832x624@75Hz
[    15.676] (II) fglrx(0): 1024x768@60Hz
[    15.676] (II) fglrx(0): 1024x768@70Hz
[    15.676] (II) fglrx(0): 1024x768@75Hz
[    15.676] (II) fglrx(0): 1280x1024@75Hz
[    15.676] (II) fglrx(0): 1152x864@75Hz
[    15.676] (II) fglrx(0): Manufacturer's mask: 10
[    15.676] (II) fglrx(0): Supported standard timings:
[    15.676] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    15.676] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    15.676] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.676] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.676] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.676] (II) fglrx(0): Supported detailed timing:
[    15.676] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    15.676] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    15.676] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    15.676] (II) fglrx(0): Serial No: LAT0C029401D
[    15.676] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[    15.676] (II) fglrx(0): Monitor name: X193W
[    15.676] (II) fglrx(0): EDID (in hex):
[    15.676] (II) fglrx(0): 	00ffffffffffff0004720c00903c7181
[    15.676] (II) fglrx(0): 	1112010380291a78ead7a5a2594a9624
[    15.676] (II) fglrx(0): 	145054bfef909500950f81808140714f
[    15.676] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[    15.676] (II) fglrx(0): 	36009a001100001c000000ff004c4154
[    15.676] (II) fglrx(0): 	3043303239343031440a000000fd0032
[    15.676] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[    15.676] (II) fglrx(0): 	0058313933570a202020202020200044
[    15.676] (II) fglrx(0): End of Display1 EDID data --------------------
[    15.676] (II) fglrx(0): Connected Display2: DFP14
[    15.676] (II) fglrx(0): Display2 EDID data ---------------------------
[    15.676] (II) fglrx(0): Manufacturer: ACR  Model: c  Serial#: 2171693302
[    15.676] (II) fglrx(0): Year: 2008  Week: 17
[    15.676] (II) fglrx(0): EDID Version: 1.3
[    15.676] (II) fglrx(0): Digital Display Input
[    15.676] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    15.676] (II) fglrx(0): Gamma: 2.20
[    15.676] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.676] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.676] (II) fglrx(0): First detailed timing is preferred mode
[    15.676] (II) fglrx(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    15.676] (II) fglrx(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    15.676] (II) fglrx(0): Supported established timings:
[    15.676] (II) fglrx(0): 720x400@70Hz
[    15.676] (II) fglrx(0): 640x480@60Hz
[    15.676] (II) fglrx(0): 640x480@67Hz
[    15.676] (II) fglrx(0): 640x480@72Hz
[    15.676] (II) fglrx(0): 640x480@75Hz
[    15.676] (II) fglrx(0): 800x600@56Hz
[    15.676] (II) fglrx(0): 800x600@60Hz
[    15.676] (II) fglrx(0): 800x600@72Hz
[    15.676] (II) fglrx(0): 800x600@75Hz
[    15.676] (II) fglrx(0): 832x624@75Hz
[    15.676] (II) fglrx(0): 1024x768@60Hz
[    15.676] (II) fglrx(0): 1024x768@70Hz
[    15.676] (II) fglrx(0): 1024x768@75Hz
[    15.676] (II) fglrx(0): 1280x1024@75Hz
[    15.676] (II) fglrx(0): 1152x864@75Hz
[    15.676] (II) fglrx(0): Manufacturer's mask: 10
[    15.676] (II) fglrx(0): Supported standard timings:
[    15.676] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    15.676] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    15.676] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.676] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.676] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.676] (II) fglrx(0): Supported detailed timing:
[    15.676] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    15.676] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    15.676] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    15.676] (II) fglrx(0): Serial No: LAT0C029401D
[    15.676] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[    15.676] (II) fglrx(0): Monitor name: X193W
[    15.676] (II) fglrx(0): EDID (in hex):
[    15.676] (II) fglrx(0): 	00ffffffffffff0004720c00f6687181
[    15.676] (II) fglrx(0): 	1112010380291a78ead7a5a2594a9624
[    15.676] (II) fglrx(0): 	145054bfef909500950f81808140714f
[    15.676] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[    15.676] (II) fglrx(0): 	36009a001100001c000000ff004c4154
[    15.676] (II) fglrx(0): 	3043303239343031440a000000fd0032
[    15.676] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[    15.676] (II) fglrx(0): 	0058313933570a2020202020202000b2
[    15.676] (II) fglrx(0): End of Display2 EDID data --------------------
[    15.677] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    15.677] (II) fglrx(0): EDID for output DFP1
[    15.677] (II) fglrx(0): EDID for output DFP2
[    15.677] (II) fglrx(0): EDID for output DFP3
[    15.677] (II) fglrx(0): EDID for output DFP4
[    15.677] (II) fglrx(0): EDID for output DFP5
[    15.677] (II) fglrx(0): EDID for output DFP6
[    15.677] (II) fglrx(0): EDID for output DFP7
[    15.677] (II) fglrx(0): EDID for output DFP8
[    15.677] (II) fglrx(0): EDID for output DFP9
[    15.677] (II) fglrx(0): Manufacturer: ACR  Model: 75  Serial#: 2231704057
[    15.677] (II) fglrx(0): Year: 2008  Week: 50
[    15.677] (II) fglrx(0): EDID Version: 1.3
[    15.677] (II) fglrx(0): Digital Display Input
[    15.677] (II) fglrx(0): Max Image Size [cm]: horiz.: 44  vert.: 25
[    15.677] (II) fglrx(0): Gamma: 2.20
[    15.677] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.677] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.677] (II) fglrx(0): First detailed timing is preferred mode
[    15.677] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    15.677] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    15.677] (II) fglrx(0): Supported established timings:
[    15.677] (II) fglrx(0): 720x400@70Hz
[    15.677] (II) fglrx(0): 640x480@60Hz
[    15.677] (II) fglrx(0): 640x480@67Hz
[    15.677] (II) fglrx(0): 640x480@72Hz
[    15.677] (II) fglrx(0): 640x480@75Hz
[    15.677] (II) fglrx(0): 800x600@56Hz
[    15.677] (II) fglrx(0): 800x600@60Hz
[    15.677] (II) fglrx(0): 800x600@72Hz
[    15.677] (II) fglrx(0): 800x600@75Hz
[    15.677] (II) fglrx(0): 832x624@75Hz
[    15.677] (II) fglrx(0): 1024x768@60Hz
[    15.677] (II) fglrx(0): 1024x768@70Hz
[    15.677] (II) fglrx(0): 1024x768@75Hz
[    15.677] (II) fglrx(0): 1280x1024@75Hz
[    15.677] (II) fglrx(0): 1152x864@75Hz
[    15.677] (II) fglrx(0): Manufacturer's mask: 0
[    15.677] (II) fglrx(0): Supported standard timings:
[    15.677] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.677] (II) fglrx(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    15.677] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    15.677] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.677] (II) fglrx(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.677] (II) fglrx(0): #5: hsize: 1360  vsize 765  refresh: 60  vid: 49291
[    15.677] (II) fglrx(0): #6: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    15.677] (II) fglrx(0): #7: hsize: 1600  vsize 900  refresh: 75  vid: 53161
[    15.677] (II) fglrx(0): Supported detailed timing:
[    15.677] (II) fglrx(0): clock: 97.8 MHz   Image Size:  443 x 249 mm
[    15.677] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1760 h_border: 0
[    15.677] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 908 v_blanking: 926 v_border: 0
[    15.677] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 155 MHz
[    15.677] (II) fglrx(0): Monitor name: Acer X203H
[    15.677] (II) fglrx(0): Serial No: LEX040064330
[    15.677] (II) fglrx(0): EDID (in hex):
[    15.677] (II) fglrx(0): 	00ffffffffffff0004727500f9190585
[    15.677] (II) fglrx(0): 	32120103802c1978eaee95a3544c9926
[    15.677] (II) fglrx(0): 	0f5054bfef80714f81c0810081408180
[    15.677] (II) fglrx(0): 	8bc0a9c0a9cf2f2640a060841a303020
[    15.677] (II) fglrx(0): 	3500bbf91000001a000000fd00384b1f
[    15.677] (II) fglrx(0): 	530f000a202020202020000000fc0041
[    15.677] (II) fglrx(0): 	6365722058323033480a2020000000ff
[    15.677] (II) fglrx(0): 	004c45583034303036343333300a00dd
[    15.677] (II) fglrx(0): Printing probed modes for output DFP9
[    15.677] (II) fglrx(0): Modeline "1600x900"x60.0   97.75  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.5 kHz eP)
[    15.677] (II) fglrx(0): Modeline "1600x900"x75.0  123.00  1600 1648 1680 1760  900 903 908 933 -hsync +vsync (69.9 kHz e)
[    15.677] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.677] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1440x900"x75.0  123.00  1440 1648 1680 1760  900 903 908 933 -hsync +vsync (69.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "1440x900"x60.0   97.75  1440 1648 1680 1760  900 903 908 926 +hsync -vsync (55.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x60.0   97.75  1152 1648 1680 1760  864 903 908 926 +hsync -vsync (55.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x768"x60.0   83.50  1280 1352 1480 1680  768 803 809 831 -hsync +vsync (49.7 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x720"x60.0   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x67.0   26.75  640 656 720 800  480 483 487 502 -hsync +vsync (33.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.678] (II) fglrx(0): EDID for output DFP10
[    15.678] (II) fglrx(0): EDID for output DFP11
[    15.678] (II) fglrx(0): EDID for output DFP12
[    15.678] (II) fglrx(0): EDID for output DFP13
[    15.678] (II) fglrx(0): Manufacturer: ACR  Model: c  Serial#: 2171681936
[    15.678] (II) fglrx(0): Year: 2008  Week: 17
[    15.678] (II) fglrx(0): EDID Version: 1.3
[    15.678] (II) fglrx(0): Digital Display Input
[    15.678] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    15.678] (II) fglrx(0): Gamma: 2.20
[    15.678] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.678] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.678] (II) fglrx(0): First detailed timing is preferred mode
[    15.678] (II) fglrx(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    15.678] (II) fglrx(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    15.678] (II) fglrx(0): Supported established timings:
[    15.678] (II) fglrx(0): 720x400@70Hz
[    15.678] (II) fglrx(0): 640x480@60Hz
[    15.678] (II) fglrx(0): 640x480@67Hz
[    15.678] (II) fglrx(0): 640x480@72Hz
[    15.678] (II) fglrx(0): 640x480@75Hz
[    15.678] (II) fglrx(0): 800x600@56Hz
[    15.678] (II) fglrx(0): 800x600@60Hz
[    15.678] (II) fglrx(0): 800x600@72Hz
[    15.678] (II) fglrx(0): 800x600@75Hz
[    15.678] (II) fglrx(0): 832x624@75Hz
[    15.678] (II) fglrx(0): 1024x768@60Hz
[    15.678] (II) fglrx(0): 1024x768@70Hz
[    15.678] (II) fglrx(0): 1024x768@75Hz
[    15.678] (II) fglrx(0): 1280x1024@75Hz
[    15.678] (II) fglrx(0): 1152x864@75Hz
[    15.678] (II) fglrx(0): Manufacturer's mask: 10
[    15.678] (II) fglrx(0): Supported standard timings:
[    15.678] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    15.678] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    15.678] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.678] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.678] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.678] (II) fglrx(0): Supported detailed timing:
[    15.678] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    15.678] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    15.678] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    15.678] (II) fglrx(0): Serial No: LAT0C029401D
[    15.678] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[    15.678] (II) fglrx(0): Monitor name: X193W
[    15.678] (II) fglrx(0): EDID (in hex):
[    15.678] (II) fglrx(0): 	00ffffffffffff0004720c00903c7181
[    15.678] (II) fglrx(0): 	1112010380291a78ead7a5a2594a9624
[    15.678] (II) fglrx(0): 	145054bfef909500950f81808140714f
[    15.678] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[    15.678] (II) fglrx(0): 	36009a001100001c000000ff004c4154
[    15.678] (II) fglrx(0): 	3043303239343031440a000000fd0032
[    15.678] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[    15.678] (II) fglrx(0): 	0058313933570a202020202020200044
[    15.678] (II) fglrx(0): Printing probed modes for output DFP13
[    15.678] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    15.678] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x800"x60.0  108.00  1280 1376 1488 1800  800 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x60.0  106.50  1152 1520 1672 1904  864 903 909 934 -hsync +vsync (55.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1376 1488 1800  768 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1376 1488 1800  720 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x67.0   26.75  640 656 720 800  480 483 487 502 -hsync +vsync (33.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.678] (II) fglrx(0): EDID for output DFP14
[    15.678] (II) fglrx(0): Manufacturer: ACR  Model: c  Serial#: 2171693302
[    15.678] (II) fglrx(0): Year: 2008  Week: 17
[    15.678] (II) fglrx(0): EDID Version: 1.3
[    15.678] (II) fglrx(0): Digital Display Input
[    15.678] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    15.678] (II) fglrx(0): Gamma: 2.20
[    15.678] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.678] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.678] (II) fglrx(0): First detailed timing is preferred mode
[    15.678] (II) fglrx(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    15.678] (II) fglrx(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    15.678] (II) fglrx(0): Supported established timings:
[    15.678] (II) fglrx(0): 720x400@70Hz
[    15.678] (II) fglrx(0): 640x480@60Hz
[    15.678] (II) fglrx(0): 640x480@67Hz
[    15.678] (II) fglrx(0): 640x480@72Hz
[    15.678] (II) fglrx(0): 640x480@75Hz
[    15.678] (II) fglrx(0): 800x600@56Hz
[    15.678] (II) fglrx(0): 800x600@60Hz
[    15.678] (II) fglrx(0): 800x600@72Hz
[    15.678] (II) fglrx(0): 800x600@75Hz
[    15.678] (II) fglrx(0): 832x624@75Hz
[    15.678] (II) fglrx(0): 1024x768@60Hz
[    15.678] (II) fglrx(0): 1024x768@70Hz
[    15.678] (II) fglrx(0): 1024x768@75Hz
[    15.678] (II) fglrx(0): 1280x1024@75Hz
[    15.678] (II) fglrx(0): 1152x864@75Hz
[    15.678] (II) fglrx(0): Manufacturer's mask: 10
[    15.678] (II) fglrx(0): Supported standard timings:
[    15.678] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    15.678] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    15.678] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.678] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.678] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.678] (II) fglrx(0): Supported detailed timing:
[    15.678] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    15.678] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    15.678] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    15.678] (II) fglrx(0): Serial No: LAT0C029401D
[    15.678] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[    15.678] (II) fglrx(0): Monitor name: X193W
[    15.678] (II) fglrx(0): EDID (in hex):
[    15.678] (II) fglrx(0): 	00ffffffffffff0004720c00f6687181
[    15.678] (II) fglrx(0): 	1112010380291a78ead7a5a2594a9624
[    15.678] (II) fglrx(0): 	145054bfef909500950f81808140714f
[    15.678] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[    15.678] (II) fglrx(0): 	36009a001100001c000000ff004c4154
[    15.678] (II) fglrx(0): 	3043303239343031440a000000fd0032
[    15.678] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[    15.678] (II) fglrx(0): 	0058313933570a2020202020202000b2
[    15.678] (II) fglrx(0): Printing probed modes for output DFP14
[    15.678] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    15.678] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x800"x60.0  108.00  1280 1376 1488 1800  800 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1152x864"x60.0  106.50  1152 1520 1672 1904  864 903 909 934 -hsync +vsync (55.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1376 1488 1800  768 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1376 1488 1800  720 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x67.0   26.75  640 656 720 800  480 483 487 502 -hsync +vsync (33.4 kHz e)
[    15.678] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.678] (II) fglrx(0): EDID for output CRT1
[    15.678] (II) fglrx(0): Output DFP1 disconnected
[    15.678] (II) fglrx(0): Output DFP2 disconnected
[    15.678] (II) fglrx(0): Output DFP3 disconnected
[    15.678] (II) fglrx(0): Output DFP4 disconnected
[    15.678] (II) fglrx(0): Output DFP5 disconnected
[    15.678] (II) fglrx(0): Output DFP6 disconnected
[    15.678] (II) fglrx(0): Output DFP7 disconnected
[    15.678] (II) fglrx(0): Output DFP8 disconnected
[    15.678] (II) fglrx(0): Output DFP9 connected
[    15.678] (II) fglrx(0): Output DFP10 disconnected
[    15.678] (II) fglrx(0): Output DFP11 disconnected
[    15.678] (II) fglrx(0): Output DFP12 disconnected
[    15.678] (II) fglrx(0): Output DFP13 connected
[    15.678] (II) fglrx(0): Output DFP14 connected
[    15.678] (II) fglrx(0): Output CRT1 disconnected
[    15.678] (II) fglrx(0): Using exact sizes for initial modes
[    15.678] (II) fglrx(0): Output DFP9 using initial mode 1440x900
[    15.678] (II) fglrx(0): Output DFP13 using initial mode 1440x900
[    15.678] (II) fglrx(0): Output DFP14 using initial mode 1440x900
[    15.678] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    15.678] (II) fglrx(0): DPI set to (96, 96)
[    15.678] (II) fglrx(0): Eyefinity capable adapter detected.
[    15.678] (II) fglrx(0): Adapter AMD Radeon HD 6900 Series has 6 configurable heads and 3 displays connected.
[    15.678] (==) fglrx(0):  PseudoColor visuals disabled
[    15.678] (II) Loading sub module "ramdac"
[    15.678] (II) LoadModule: "ramdac"
[    15.678] (II) Module "ramdac" already built-in
[    15.678] (==) fglrx(0): NoDRI = NO
[    15.678] (==) fglrx(0): Capabilities: 0x00000000
[    15.678] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    15.678] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    15.678] (==) fglrx(0): UseFastTLS=0
[    15.679] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    15.679] (--) Depth 24 pixmap format is 32 bpp
[    15.679] (II) fglrx(0): doing swlDriScreenInit
[    15.679] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    15.679] ukiDynamicMajor: found major device number 251
[    15.679] ukiDynamicMajor: found major device number 251
[    15.679] ukiDynamicMajor: found major device number 251
[    15.679] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.679] ukiOpenDevice: node name is /dev/ati/card0
[    15.679] ukiOpenDevice: open result is 12, (OK)
[    15.679] ukiOpenByBusid: ukiOpenMinor returns 12
[    15.679] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.679] (II) fglrx(0): [uki] DRM interface version 1.0
[    15.679] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    15.679] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    15.679] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f049aa60000
[    15.679] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    15.679] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    15.679] (II) fglrx(0): swlDriScreenInit done
[    15.679] (II) fglrx(0): Kernel Module Version Information:
[    15.679] (II) fglrx(0):     Name: fglrx
[    15.679] (II) fglrx(0):     Version: 14.20.7
[    15.679] (II) fglrx(0):     Date: Sep  2 2014
[    15.679] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    15.679] (II) fglrx(0): Kernel Module version matches driver.
[    15.679] (II) fglrx(0): Kernel Module Build Time Information:
[    15.679] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.16.0-4-amd64
[    15.679] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    15.679] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    15.679] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    15.679] (II) fglrx(0): [uki] register handle = 0x00004000
[    15.681] (II) fglrx(0): Display width adjusted to to 1536 due to alignment constraints
[    15.681] (II) fglrx(0): DRI initialization successfull
[    15.681] (II) fglrx(0): FBADPhys: 0xf800000000 FBMappedSize: 0x01140000
[    15.682] (==) fglrx(0): Backing store enabled
[    15.682] (==) fglrx(0): DPMS enabled
[    15.682] (II) fglrx(0): Initialized in-driver Xinerama extension
[    15.682] (**) fglrx(0): Textured Video is enabled.
[    15.682] (II) LoadModule: "glesx"
[    15.683] (II) Loading /usr/lib/xorg/modules/glesx.so
[    15.690] (II) Module glesx: vendor="X.Org Foundation"
[    15.690] 	compiled for 1.4.99.906, module version = 1.0.0
[    15.690] (II) fglrx(0): GLESX enableFlags = 8784
[    15.691] (II) fglrx(0): GLESX is enabled
[    15.691] (II) LoadModule: "amdxmm"
[    15.691] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    15.692] (II) Module amdxmm: vendor="X.Org Foundation"
[    15.692] 	compiled for 1.4.99.906, module version = 2.0.0
[    15.714] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    15.715] (II) fglrx(0): Enable composite support successfully
[    15.716] (II) fglrx(0): X context handle = 0x1
[    15.716] (II) fglrx(0): [DRI] installation complete
[    15.716] (==) fglrx(0): Silken mouse enabled
[    15.716] (==) fglrx(0): Using HW cursor of display infrastructure!
[    15.716] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.825] (--) RandR disabled
[    15.828] (II) SELinux: Disabled on system
[    15.829] ukiDynamicMajor: found major device number 251
[    15.829] ukiDynamicMajor: found major device number 251
[    15.829] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.829] ukiOpenDevice: node name is /dev/ati/card0
[    15.829] ukiOpenDevice: open result is 13, (OK)
[    15.829] ukiOpenByBusid: ukiOpenMinor returns 13
[    15.829] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.829] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    15.829] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    15.830] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    15.849] ukiDynamicMajor: found major device number 251
[    15.849] ukiDynamicMajor: found major device number 251
[    15.849] ukiDynamicMajor: found major device number 251
[    15.849] ukiOpenDevice: node name is /dev/ati/card0
[    15.849] ukiOpenDevice: open result is 14, (OK)
[    15.849] ukiGetBusid returned 'PCI:1:0:0'
[    15.849] ukiOpenDevice: node name is /dev/ati/card1
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card2
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card3
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card4
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card5
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card6
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card7
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card8
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card9
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card10
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card11
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.849] ukiOpenDevice: node name is /dev/ati/card12
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: open result is -1, (No such device)
[    15.849] ukiOpenDevice: Open failed
[    15.850] ukiOpenDevice: node name is /dev/ati/card13
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: Open failed
[    15.850] ukiOpenDevice: node name is /dev/ati/card14
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: Open failed
[    15.850] ukiOpenDevice: node name is /dev/ati/card15
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: open result is -1, (No such device)
[    15.850] ukiOpenDevice: Open failed
[    15.850] ukiDynamicMajor: found major device number 251
[    15.850] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.850] ukiOpenDevice: node name is /dev/ati/card0
[    15.850] ukiOpenDevice: open result is 14, (OK)
[    15.850] ukiOpenByBusid: ukiOpenMinor returns 14
[    15.850] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.908] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    15.909] ukiDynamicMajor: found major device number 251
[    15.909] ukiDynamicMajor: found major device number 251
[    15.909] ukiDynamicMajor: found major device number 251
[    15.909] ukiOpenDevice: node name is /dev/ati/card0
[    15.909] ukiOpenDevice: open result is 15, (OK)
[    15.909] ukiGetBusid returned 'PCI:1:0:0'
[    15.909] ukiOpenDevice: node name is /dev/ati/card1
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card2
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card3
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card4
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card5
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card6
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card7
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card8
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card9
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card10
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card11
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card12
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card13
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card14
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiOpenDevice: node name is /dev/ati/card15
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: open result is -1, (No such device)
[    15.909] ukiOpenDevice: Open failed
[    15.909] ukiDynamicMajor: found major device number 251
[    15.909] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.909] ukiOpenDevice: node name is /dev/ati/card0
[    15.909] ukiOpenDevice: open result is 15, (OK)
[    15.909] ukiOpenByBusid: ukiOpenMinor returns 15
[    15.909] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.920] (II) fglrx(0): OverDrive5 Detected!
[    15.922] (II) fglrx(0): Setting screen physical size to 381 x 238
[    15.951] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.951] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.951] (II) LoadModule: "evdev"
[    15.951] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.952] (II) Module evdev: vendor="X.Org Foundation"
[    15.952] 	compiled for 1.16.0, module version = 2.9.0
[    15.952] 	Module class: X.Org XInput Driver
[    15.952] 	ABI class: X.Org XInput driver, version 21.0
[    15.952] (II) Using input driver 'evdev' for 'Power Button'
[    15.952] (**) Power Button: always reports core events
[    15.952] (**) evdev: Power Button: Device: "/dev/input/event1"
[    15.952] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.952] (--) evdev: Power Button: Found keys
[    15.952] (II) evdev: Power Button: Configuring as keyboard
[    15.952] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[    15.952] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.952] (**) Option "xkb_rules" "evdev"
[    15.952] (**) Option "xkb_model" "pc105"
[    15.952] (**) Option "xkb_layout" "ch"
[    15.952] (**) Option "xkb_variant" "fr"
[    15.962] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    15.962] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.962] (II) Using input driver 'evdev' for 'Power Button'
[    15.962] (**) Power Button: always reports core events
[    15.962] (**) evdev: Power Button: Device: "/dev/input/event0"
[    15.962] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.962] (--) evdev: Power Button: Found keys
[    15.962] (II) evdev: Power Button: Configuring as keyboard
[    15.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[    15.962] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    15.962] (**) Option "xkb_rules" "evdev"
[    15.962] (**) Option "xkb_model" "pc105"
[    15.962] (**) Option "xkb_layout" "ch"
[    15.962] (**) Option "xkb_variant" "fr"
[    15.962] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[    15.962] (II) No input driver specified, ignoring this device.
[    15.962] (II) This device may have been added with another device file.
[    15.962] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event10)
[    15.962] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    15.962] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[    15.962] (**) Logitech Logitech USB Keyboard: always reports core events
[    15.962] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event10"
[    15.962] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc316
[    15.962] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[    15.962] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[    15.962] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C316.0001/input/input14/event10"
[    15.962] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 8)
[    15.962] (**) Option "xkb_rules" "evdev"
[    15.962] (**) Option "xkb_model" "pc105"
[    15.962] (**) Option "xkb_layout" "ch"
[    15.962] (**) Option "xkb_variant" "fr"
[    15.962] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event11)
[    15.962] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    15.962] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[    15.962] (**) Logitech Logitech USB Keyboard: always reports core events
[    15.962] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event11"
[    15.962] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc316
[    15.962] (--) evdev: Logitech Logitech USB Keyboard: Found 1 mouse buttons
[    15.962] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[    15.962] (II) evdev: Logitech Logitech USB Keyboard: Forcing relative x/y axes to exist.
[    15.962] (II) evdev: Logitech Logitech USB Keyboard: Configuring as mouse
[    15.962] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[    15.962] (**) evdev: Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[    15.962] (**) evdev: Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C316.0002/input/input15/event11"
[    15.963] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 9)
[    15.963] (**) Option "xkb_rules" "evdev"
[    15.963] (**) Option "xkb_model" "pc105"
[    15.963] (**) Option "xkb_layout" "ch"
[    15.963] (**) Option "xkb_variant" "fr"
[    15.963] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[    15.963] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    15.963] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    15.963] (**) Logitech USB Receiver: always reports core events
[    15.963] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[    15.963] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    15.963] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    15.963] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    15.963] (--) evdev: Logitech USB Receiver: Found relative axes
[    15.963] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    15.963] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    15.963] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    15.963] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    15.963] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C52F.0003/input/input16/event12"
[    15.963] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    15.963] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    15.963] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    15.963] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    15.963] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    15.963] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    15.963] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    15.963] (II) No input driver specified, ignoring this device.
[    15.963] (II) This device may have been added with another device file.
[    15.963] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[    15.963] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    15.963] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    15.963] (**) Logitech USB Receiver: always reports core events
[    15.963] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[    15.963] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    15.963] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    15.963] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    15.963] (--) evdev: Logitech USB Receiver: Found relative axes
[    15.963] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    15.963] (--) evdev: Logitech USB Receiver: Found absolute axes
[    15.963] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    15.963] (--) evdev: Logitech USB Receiver: Found keys
[    15.963] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    15.963] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    15.963] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    15.963] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    15.963] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52F.0004/input/input17/event13"
[    15.963] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    15.963] (**) Option "xkb_rules" "evdev"
[    15.963] (**) Option "xkb_model" "pc105"
[    15.963] (**) Option "xkb_layout" "ch"
[    15.963] (**) Option "xkb_variant" "fr"
[    15.964] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    15.964] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    15.964] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    15.964] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    15.964] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    15.964] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    15.964] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.964] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.964] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.964] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.964] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.964] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[    15.964] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    15.964] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    15.964] (**) Eee PC WMI hotkeys: always reports core events
[    15.964] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[    15.964] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    15.964] (--) evdev: Eee PC WMI hotkeys: Found keys
[    15.964] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    15.964] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[    15.964] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[    15.964] (**) Option "xkb_rules" "evdev"
[    15.964] (**) Option "xkb_model" "pc105"
[    15.964] (**) Option "xkb_layout" "ch"
[    15.964] (**) Option "xkb_variant" "fr"
[    15.964] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    15.964] (II) No input driver specified, ignoring this device.
[    15.964] (II) This device may have been added with another device file.
[    15.966] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    16.365] (II) fglrx(0): EDID vendor "ACR", prod id 12
[    16.365] (II) fglrx(0): Using EDID range info for horizontal sync
[    16.365] (II) fglrx(0): Using EDID range info for vertical refresh
[    16.365] (II) fglrx(0): Printing DDC gathered Modelines:
[    16.365] (II) fglrx(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    16.365] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.365] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.365] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    16.365] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.365] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.365] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.365] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.365] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.365] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.365] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    16.365] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    16.365] (II) fglrx(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    16.365] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.365] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    23.748] (II) AIGLX: Suspending AIGLX clients for VT switch
[    23.748] (II) fglrx(0): Backup framebuffer data.
[    23.766] (II) fglrx(0): Backup complete.

Merci

P.S. : Y aurait-il un moyen d'afficher ce fichier un peu plus proprement, de la même façon qu'anciennement avec la balise <secret> ?

-
Edité par jtruc34 22 avril 2015 à 20:26:29

jtruc34

18 avril 2015 à 1:11:08

Bonjour,

Re-éternel problème que je n'ai toujours pas résolu : configurer plusieurs écrans sous Debian. Déjà, bizarrement, je n'ai rien trouvé du tout que eût pu m'aidé. Je viens de passer toute la soirée, après avoir installer Debian testing, c'est-à-dire Jessie(pensant que, comme à la seule autre personne qui ait eu ce problème, cela résoudrait mon problème), et après avoir peiner aussi à comprendre l'installation sur système EFI(les distributions Linux, décidément, ne font aucun effort pour augmenter leur faible popularité), et enfin après avoir démarrer sur mon système neuf, mes trois écrans branchés fonctionnant parfaitement sur Windows(avec l'Eyefinity, ayant une Radeon 6950 HD), refusent d'afficher plus d'un bureau cloné(quoique, deux bureaux clonés c'est pas terrible :lol: ). Je signale que cela fonctionnait autrefois sur Ubuntu, j'entends par fonctionner, un bureau étendu sur mes trois écrans(et même si c'étaient trois bureaux, ça ne me dérangerait pas trop), que ce fût avec les pilotes libres par défaut(Radeon) ou avec les pilotes propriétaires, alors que, depuis septembre 2014 que je suis passé sur Debian dans une optique morale(je ne reviendrai pas sur Ubuntu), je n'y suis jamais parvenu. J'implore une aide, s'il vous plaît, ayez pitié d'une pauvre âme désespérée, pratiquement prête à revenir chez les collabos.

P.S.: Si cette description manque de clarté, c'est probablement dû à mon état peu favorable à une conduite claire de phrases. Je serai ravi de donner tous les détails nécessaires s'il en faudra donner.

-
Edité par jtruc34 18 avril 2015 à 1:12:43

18 avril 2015 à 13:44:13

J'ajouterais, peut-être cela donnera-t-il des idées, que, au chargement du BIOS UEFI, sur le choix d'OS et aussi quand Debian tourne, seul deux des trois écrans affichent une image clonée, et même si j'éteins les deux écrans concernés, le dernier écran(qui est d'ailleurs l'écran central) n'affiche toujours rien. Le seul moment où il se décide, c'est quand Windows est ouvert, à la sélection de l'utilisateur.

-
Edité par jtruc34 18 avril 2015 à 14:28:09

cjd

18 avril 2015 à 18:02:23

Salut

Tout ça se gère avec xrandr . Si tu ne veux pas te plonger dans la doc , tu peux utiliser arandr et ça te permettra de savoir rapidement ce qui cloche.

A plus

18 avril 2015 à 18:57:12

J'ai utilisé ARandR. Le mieux est encore une capture d'écran. Je l'envoie dans un moment.

Mais je maintiens : c'est bizarre que ça fonctionnât sur Ubuntu sans rien faire de bien particulier si ce n'est d'aller dans les réglages d'affichage.

-
Edité par jtruc34 18 avril 2015 à 19:49:20

18 avril 2015 à 19:52:55

Paramètres -> Écrans :

ARandR :

18 avril 2015 à 20:48:45

Effectivement , y a comme qui dirait un problème de reconnaissance de tes écrans . La solution semble être dans ce post : installer un noyau plus récent ( pas testé , pas de debian )

Bonne chance

19 avril 2015 à 1:55:08

Le truc, c'est que je suis sur Debian Jessie, et que donc j'ai le noyau 3.16 sauf erreur(pas l'envie à cette heure d'aller contrôler, mais je crois ne pas me tromper).

Et pour l'écran utilisé par l'UEFI, un moyen de le choisir ? (bizarre surtout qu'il ne passe pas sur le seul écran actif si j'éteins les deux autres)

D'ailleurs je viens de lire sur le dernier commentaire qu'il avait toujours un problème, le même que moi.

-
Edité par jtruc34 19 avril 2015 à 2:01:34

19 avril 2015 à 10:56:53

Peut être une piste qui pourrait expliquer pourquoi ça fonctionne bien sous Ubuntu et pas sur Debian : le microcode de la carte n'est pas installé automatiquement parce que pas libre . Les détails ici .

19 avril 2015 à 15:14:58

C'est génial ! Ça a résolu mon problème. Je ne sais pas pourquoi d'ailleurs, car j'avais déjà testé cette solution autrefois, mais ça m'avait donné un tas de bugs genre des fenêtres qui se bloquent totalement en changeant d'écran. Mais maintenant ça marche ! Dernier problème, le ventilo de la carte graphique se met maintenant à tourner tout le temps à fond.

D'ailleurs, pourrait-on m'expliquer la différence entre installer les pilotes propriétaires et installer le micro-code propriétaire.

(d'ailleurs ils pourraient dire un peu mieux que ça, Debian, et en plus, AMD collabore, contrairement à nVidia, pour faire des pilotes libres, et franchement, ces pilotes libres...)

-
Edité par jtruc34 19 avril 2015 à 15:20:34

20 avril 2015 à 20:14:33

Je remonte ce sujet en précisant pour ceux qui n'auraient pas vu la suite de mon dernier post que j'ai encore un problème.

21 avril 2015 à 21:36:45

Up!

22 avril 2015 à 10:10:19

C'est un bug du pilote libre apparemment résolu . Essaye d'appliquer les solutions proposées dans le premier lien sinon installe le pilote propriétaire .

22 avril 2015 à 13:18:37

Merci beaucoup. Je vous tiens au courant

22 avril 2015 à 15:07:06

Alors, j'ai installé les pilotes proprios, et maintenant je n'ai plus d'interface graphique du tout. Je peux utiliser mon ordi depuis les terminaux tty1 à 6. Mon xorg.conf est celui créé lors de l'installation des pilotes amd.

22 avril 2015 à 17:15:17

La , il faudrait que tu en dise un peu plus :

* Modèle de ta carte

* Est ce que tu t'es servi de cette doc et quel pilote as tu installé?

* Est ce que tu as bien redémarré pour activer le blacklistage du module radeon ? ( tu peut vérifier sa présence avec un

"lsmod | grep radeon"

* Regarde le fichier /var/log/Xorg.0.log pour voir ce qui à planté .

22 avril 2015 à 20:23:46

23 avril 2015 à 17:19:09

D’après le log , le serveur tourne mais tu ne vois rien . J'avoue que je n'ai pas vraiment d'autres idées pour résoudre ton problème d'autant plus que je n'ai pas de carte ati sous la main .

Désolé