le montage électronique a été réussie parfaitement mais lors du téléversement du code une erreur s'affiche dans la console
Arduino : 1.8.4 (Windows 10), Carte : "Arduino Leonardo"
Le croquis utilise 16520 octets (57%) de l'espace de stockage de programmes. Le maximum est de 28672 octets.
Les variables globales utilisent 544 octets (21%) de mémoire dynamique, ce qui laisse 2016 octets pour les variables locales. Le maximum est de 2560 octets.
Redémarrage forcé en cours en 1200bps ouvert/fermé sur le port COM6
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
PORTS {COM4, COM5, COM6, } / {COM4, COM5, COM6, } => {}
Uploading using selected port: COM6
C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM6 -b57600 -D -Uflash:w:C:\Users\Toto\AppData\Local\Temp\arduino_build_65856/tpe.ino.hex:i
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"
Using Port : COM6
Using Programmer : avr109
Overriding Baud Rate : 57600
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00
flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : butterfly
Description : Atmel AppNote AVR109 Boot Loader
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
Found programmer: Id = ""; type = @
Software Version = ¥.t; Hardware Version = “.ð
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude: butterfly_recv(): programmer is not responding
avrdude: error: programmer did not respond to command: leave prog mode
avrdude: butterfly_recv(): programmer is not responding
avrdude: error: programmer did not respond to command: exit bootloader
avrdude done. Thank you.
le port série sélectionné
n'existe pas ou votre Arduino n'est pas connectée
j'utilise une arduino uno R3 de selectronic.
merci de m'accorder votre aide.
[ARDUINO] vr+skateboard
× Après avoir cliqué sur "Répondre" vous serez invité à vous connecter pour que votre message soit publié.
× Attention, ce sujet est très ancien. Le déterrer n'est pas forcément approprié. Nous te conseillons de créer un nouveau sujet pour poser ta question.