Bonjour,

j'utilise Kali Linux et il m'est impossible d'utiliser les services Wifi et Bluetooth

sur ma machine car le mode avion est activé.

Lorsque j'appuie sur F12 pour le désactiver ça affiche «Mode avion materiel»

merci de bien vouloir m'aider

infos de ma machine

# iwconfig 
wlan0     IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          
eth0      no wireless extensions.

usb0      no wireless extensions.

lo        no wireless extensions.

ifconfig -a
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 78:e3:b5:7a:81:ea  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 30575  bytes 8296344 (7.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 30575  bytes 8296344 (7.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.42.136  netmask 255.255.255.0  broadcast 192.168.42.255
        inet6 fe80::bc1e:14ff:fe3b:2850  prefixlen 64  scopeid 0x20<link>
        ether be:1e:14:3b:28:50  txqueuelen 1000  (Ethernet)
        RX packets 21905  bytes 8514630 (8.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 24716  bytes 4252852 (4.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether aa:35:a3:29:91:ca  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

# ifconfig wlan0 up
SIOCSIFFLAGS: Opération impossible du fait de RF-kill

# rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes

# rfkill unblock all

# rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes

-
Edité par IsmaelSeck11 1 novembre 2019 à 17:08:53