et Placez ce fichier dans le dossier correspondant à votre utilisateur Windows, Mac ou Linux.
Est ce que ça veut dire qu'il faut que j'aille dans ce path `C:\Users\wilfr` Et que je colle le fichier foodly.sql ?
C'est ce que j'ai fait ensuite quand je tape cette commande dans le terminal (MySQL 8.0 Command line client )
mysql -u root -p foodly < foodly.sql;
Et la console me répond
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mysql -u root -p foodly < foodly.sql' at line 1
PS - on a la même citation en fin de post ^^
- Edité par Tortue_Ninja 4 avril 2022 à 15:53:00
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Je m'en douté c'est pour ça que j'ai précisé quel terminal j'utilisé à contrario quand je tape la commande dans l'invit de commande windows j'obtient.
C:\Users\wilfr>mysql -u root -p foodly < foodly.sql;
'mysql' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
Est ce normal ?
----- UPDATE ------
J'ai alors localisé le fichier mysql.exe dans
C:\Program Files\MySQL\MySQL Server 8.0\bin
J'ai retapé la commande en me localisant sur ce path depuis l'invite de commade. et l'output de la console c'est changé en le fichier demandé n'est pas localiser.
Alors j'ai copier coller le fichier foodly.sql dans le path ci dessus retaper la commande et là voici le message de ma console
C:\Program Files\MySQL\MySQL Server 8.0\bin>mysql -u root -p foodly < foodly.sql;
mysql Ver 8.0.28 for Win64 on x86_64 (MySQL Community Server - GPL)
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Usage: mysql [OPTIONS] [database]
-?, --help Display this help and exit.
-I, --help Synonym for -?
--auto-rehash Enable automatic rehashing. One doesn't need to use
'rehash' to get table and field completion, but startup
and reconnecting may take a longer time. Disable with
--disable-auto-rehash.
(Defaults to on; use --skip-auto-rehash to disable.)
-A, --no-auto-rehash
No automatic rehashing. One has to use 'rehash' to get
table and field completion. This gives a quicker start of
mysql and disables rehashing on reconnect.
--auto-vertical-output
Automatically switch to vertical output mode if the
result is wider than the terminal width.
-B, --batch Don't use history file. Disable interactive behavior.
(Enables --silent.)
--bind-address=name IP address to bind to.
--binary-as-hex Print binary data as hex. Enabled by default for
interactive terminals.
--character-sets-dir=name
Directory for character set files.
--column-type-info Display column type information.
-c, --comments Preserve comments. Send comments to the server. The
default is --skip-comments (discard comments), enable
with --comments.
-C, --compress Use compression in server/client protocol.
-#, --debug[=#] This is a non-debug version. Catch this and exit.
--debug-check This is a non-debug version. Catch this and exit.
-T, --debug-info This is a non-debug version. Catch this and exit.
-D, --database=name Database to use.
--default-character-set=name
Set the default character set.
--delimiter=name Delimiter to be used.
--enable-cleartext-plugin
Enable/disable the clear text authentication plugin.
-e, --execute=name Execute command and quit. (Disables --force and history
file.)
-E, --vertical Print the output of a query (rows) vertically.
-f, --force Continue even if we get an SQL error.
--histignore=name A colon-separated list of patterns to keep statements
from getting logged into syslog and mysql history.
-G, --named-commands
Enable named commands. Named commands mean this program's
internal commands; see mysql> help . When enabled, the
named commands can be used from any line of the query,
otherwise only from the first line, before an enter.
Disable with --disable-named-commands. This option is
disabled by default.
-i, --ignore-spaces Ignore space after function names.
--init-command=name SQL Command to execute when connecting to MySQL server.
Will automatically be re-executed when reconnecting.
--local-infile Enable/disable LOAD DATA LOCAL INFILE.
-b, --no-beep Turn off beep on error.
-h, --host=name Connect to host.
--dns-srv-name=name Connect to a DNS SRV resource
-H, --html Produce HTML output.
-X, --xml Produce XML output.
--line-numbers Write line numbers for errors.
(Defaults to on; use --skip-line-numbers to disable.)
-L, --skip-line-numbers
Don't write line number for errors.
-n, --unbuffered Flush buffer after each query.
--column-names Write column names in results.
(Defaults to on; use --skip-column-names to disable.)
-N, --skip-column-names
Don't write column names in results.
--sigint-ignore Ignore SIGINT (CTRL-C).
-o, --one-database Ignore statements except those that occur while the
default database is the one named at the command line.
-p, --password[=name]
Password to use when connecting to server. If password is
not given it's asked from the tty.
-,, --password1[=name]
Password for first factor authentication plugin.
-,, --password2[=name]
Password for second factor authentication plugin.
-,, --password3[=name]
Password for third factor authentication plugin.
-W, --pipe Use named pipes to connect to server.
-P, --port=# Port number to use for connection or 0 for default to, in
order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
--prompt=name Set the mysql prompt to this value.
--protocol=name The protocol to use for connection (tcp, socket, pipe,
memory).
-q, --quick Don't cache result, print it row by row. This may slow
down the server if the output is suspended. Doesn't use
history file.
-r, --raw Write fields without conversion. Used with --batch.
--reconnect Reconnect if the connection is lost. Disable with
--disable-reconnect. This option is enabled by default.
(Defaults to on; use --skip-reconnect to disable.)
-s, --silent Be more silent. Print results with a tab as separator,
each row on new line.
--shared-memory-base-name=name
Base name of shared memory.
-S, --socket=name The socket file to use for connection.
--server-public-key-path=name
File path to the server public RSA key in PEM format.
--get-server-public-key
Get server public key
--ssl-mode=name SSL connection mode.
--ssl-ca=name CA file in PEM format.
--ssl-capath=name CA directory.
--ssl-cert=name X509 cert in PEM format.
--ssl-cipher=name SSL cipher to use.
--ssl-key=name X509 key in PEM format.
--ssl-crl=name Certificate revocation list.
--ssl-crlpath=name Certificate revocation list path.
--tls-version=name TLS version to use, permitted values are: TLSv1.2,
TLSv1.3
--ssl-fips-mode=name
SSL FIPS mode (applies only for OpenSSL); permitted
values are: OFF, ON, STRICT
--tls-ciphersuites=name
TLS v1.3 cipher to use.
-t, --table Output in table format.
--tee=name Append everything into outfile. See interactive help (\h)
also. Does not work in batch mode. Disable with
--disable-tee. This option is disabled by default.
-u, --user=name User for login if not current user.
-U, --safe-updates Only allow UPDATE and DELETE that uses keys.
-U, --i-am-a-dummy Synonym for option --safe-updates, -U.
-v, --verbose Write more. (-v -v -v gives the table output format).
-V, --version Output version information and exit.
-w, --wait Wait and retry if connection is down.
--connect-timeout=# Number of seconds before connection timeout.
--max-allowed-packet=#
The maximum packet length to send to or receive from
server.
--net-buffer-length=#
The buffer size for TCP/IP and socket communication.
--select-limit=# Automatic limit for SELECT when using --safe-updates.
--max-join-size=# Automatic limit for rows in a join when using
--safe-updates.
--show-warnings Show warnings after every statement.
-j, --syslog Log filtered interactive commands to syslog. Filtering of
commands depends on the patterns supplied via histignore
option besides the default patterns.
--plugin-dir=name Directory for client-side plugins.
--default-auth=name Default authentication client-side plugin to use.
--binary-mode By default, ASCII '\0' is disallowed and '\r\n' is
translated to '\n'. This switch turns off both features,
and also turns off parsing of all clientcommands except
\C and DELIMITER, in non-interactive mode (for input
piped to mysql or loaded using the 'source' command).
This is necessary when processing output from mysqlbinlog
that may contain blobs.
--connect-expired-password
Notify the server that this client is prepared to handle
expired password sandbox mode.
--compression-algorithms=name
Use compression algorithm in server/client protocol.
Valid values are any combination of
'zstd','zlib','uncompressed'.
--zstd-compression-level=#
Use this compression level in the client/server protocol,
in case --compression-algorithms=zstd. Valid range is
between 1 and 22, inclusive. Default is 3.
--load-data-local-dir=name
Directory path safe for LOAD DATA LOCAL INFILE to read
from.
--fido-register-factor=name
Specifies authentication factor, for which registration
needs to be done.
--oci-config-file=name
Specifies the location of the OCI configuration file.
Default for Linux is ~/.oci/config and %HOME/.oci/config
on Windows.
Default options are read from the following files in the given order:
C:\WINDOWS\my.ini C:\WINDOWS\my.cnf C:\my.ini C:\my.cnf C:\Program Files\MySQL\MySQL Server 8.0\my.ini C:\Program Files\MySQL\MySQL Server 8.0\my.cnf
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option file,
except for login file.
--defaults-file=# Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
--defaults-group-suffix=#
Also read groups with concat(group, suffix)
--login-path=# Read this path from the login file.
Variables (--variable-name=value)
and boolean options {FALSE|TRUE} Value (after reading options)
--------------------------------- ----------------------------------------
auto-rehash TRUE
auto-vertical-output FALSE
bind-address (No default value)
binary-as-hex FALSE
character-sets-dir (No default value)
column-type-info FALSE
comments FALSE
compress FALSE
database (No default value)
default-character-set auto
delimiter ;
enable-cleartext-plugin FALSE
vertical FALSE
force FALSE
histignore (No default value)
named-commands FALSE
ignore-spaces FALSE
init-command (No default value)
local-infile FALSE
no-beep FALSE
host (No default value)
dns-srv-name (No default value)
html FALSE
xml FALSE
line-numbers TRUE
unbuffered FALSE
column-names TRUE
sigint-ignore FALSE
port 0
prompt mysql>
quick FALSE
raw FALSE
reconnect FALSE
shared-memory-base-name (No default value)
socket (No default value)
server-public-key-path (No default value)
get-server-public-key FALSE
ssl-ca (No default value)
ssl-capath (No default value)
ssl-cert (No default value)
ssl-cipher (No default value)
ssl-key (No default value)
ssl-crl (No default value)
ssl-crlpath (No default value)
tls-version (No default value)
tls-ciphersuites (No default value)
table FALSE
user root
safe-updates FALSE
i-am-a-dummy FALSE
connect-timeout 0
max-allowed-packet 16777216
net-buffer-length 16384
select-limit 1000
max-join-size 1000000
show-warnings FALSE
plugin-dir (No default value)
default-auth (No default value)
binary-mode FALSE
connect-expired-password FALSE
compression-algorithms (No default value)
zstd-compression-level 3
load-data-local-dir (No default value)
fido-register-factor (No default value)
oci-config-file (No default value)
Je ne sais pas si ça a marché ou pas. Cependant, j'ai une question dans le cas ou ça a marché.
Existe il un autre moyen de télécharger un fichier .sql pour mettre a jour une BDD déja créer sans devoir placer le fichier .sql télécharger dans le path mentionné ci dessus ?
- Edité par Tortue_Ninja 4 avril 2022 à 17:11:43
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
'mysql' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
Cela est dû à la variable d'environnement PATH de Windows. Il faut ajouter le chemin vers MySQL/bin dans cette variable. C'est vrai que le cours n'explique pas du tout cela ... mais tu trouveras facilement des exemples sur le net.
Tortue_Ninja a écrit:
Existe il un autre moyen de télécharger un fichier .sql pour mettre a jour une BDD déja créer sans devoir placer le fichier .sql télécharger dans le path mentionné ci dessus ?
Une manière plus "facile" est d'utiliser une interface graphique comme peuvent l'être MySQL Workbench, PHPMyAdmin ou Adminer par exemple. Pour ces deux derniers, cela t'oblige d'installer un serveur web local (type XAMPP ou WAMP).
J'ai ajouté le chemin à la variable d'environnement PATH de windows. Maintenant le terminal reconnais la commande mysql.
Cependant je ne suis pas sur que ça ai fonctionné.
Je ne sais pas si le probleme viens du fait que mon utilisateur "root" est besoin d'un mot de passe pour se connecter. ( Je n'ai pas eu le choix que d'ajouter un mot de passe en installant mySQL 8 ou j'ai pas compris comment je pouvais ne pas mettre de mot de passe pour l'utilisateur root )
Bref je ne sais pas si ça a marché ou pas et voila ce que la console me répond. ( elle me renvoi la doc quand j'entre la commande )
C:\Users\wilfr>mysql -u root -p foodly < foodly.sql;
mysql Ver 8.0.28 for Win64 on x86_64 (MySQL Community Server - GPL)
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Usage: mysql [OPTIONS] [database]
-?, --help Display this help and exit.
-I, --help Synonym for -?
--auto-rehash Enable automatic rehashing. One doesn't need to use
'rehash' to get table and field completion, but startup
and reconnecting may take a longer time. Disable with
--disable-auto-rehash.
(Defaults to on; use --skip-auto-rehash to disable.)
-A, --no-auto-rehash
No automatic rehashing. One has to use 'rehash' to get
table and field completion. This gives a quicker start of
mysql and disables rehashing on reconnect.
--auto-vertical-output
Automatically switch to vertical output mode if the
result is wider than the terminal width.
-B, --batch Don't use history file. Disable interactive behavior.
(Enables --silent.)
--bind-address=name IP address to bind to.
--binary-as-hex Print binary data as hex. Enabled by default for
interactive terminals.
--character-sets-dir=name
Directory for character set files.
--column-type-info Display column type information.
-c, --comments Preserve comments. Send comments to the server. The
default is --skip-comments (discard comments), enable
with --comments.
-C, --compress Use compression in server/client protocol.
-#, --debug[=#] This is a non-debug version. Catch this and exit.
--debug-check This is a non-debug version. Catch this and exit.
-T, --debug-info This is a non-debug version. Catch this and exit.
-D, --database=name Database to use.
--default-character-set=name
Set the default character set.
--delimiter=name Delimiter to be used.
--enable-cleartext-plugin
Enable/disable the clear text authentication plugin.
-e, --execute=name Execute command and quit. (Disables --force and history
file.)
-E, --vertical Print the output of a query (rows) vertically.
-f, --force Continue even if we get an SQL error.
--histignore=name A colon-separated list of patterns to keep statements
from getting logged into syslog and mysql history.
-G, --named-commands
Enable named commands. Named commands mean this program's
internal commands; see mysql> help . When enabled, the
named commands can be used from any line of the query,
otherwise only from the first line, before an enter.
Disable with --disable-named-commands. This option is
disabled by default.
-i, --ignore-spaces Ignore space after function names.
--init-command=name SQL Command to execute when connecting to MySQL server.
Will automatically be re-executed when reconnecting.
--local-infile Enable/disable LOAD DATA LOCAL INFILE.
-b, --no-beep Turn off beep on error.
-h, --host=name Connect to host.
--dns-srv-name=name Connect to a DNS SRV resource
-H, --html Produce HTML output.
-X, --xml Produce XML output.
--line-numbers Write line numbers for errors.
(Defaults to on; use --skip-line-numbers to disable.)
-L, --skip-line-numbers
Don't write line number for errors.
-n, --unbuffered Flush buffer after each query.
--column-names Write column names in results.
(Defaults to on; use --skip-column-names to disable.)
-N, --skip-column-names
Don't write column names in results.
--sigint-ignore Ignore SIGINT (CTRL-C).
-o, --one-database Ignore statements except those that occur while the
default database is the one named at the command line.
-p, --password[=name]
Password to use when connecting to server. If password is
not given it's asked from the tty.
-,, --password1[=name]
Password for first factor authentication plugin.
-,, --password2[=name]
Password for second factor authentication plugin.
-,, --password3[=name]
Password for third factor authentication plugin.
-W, --pipe Use named pipes to connect to server.
-P, --port=# Port number to use for connection or 0 for default to, in
order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
--prompt=name Set the mysql prompt to this value.
--protocol=name The protocol to use for connection (tcp, socket, pipe,
memory).
-q, --quick Don't cache result, print it row by row. This may slow
down the server if the output is suspended. Doesn't use
history file.
-r, --raw Write fields without conversion. Used with --batch.
--reconnect Reconnect if the connection is lost. Disable with
--disable-reconnect. This option is enabled by default.
(Defaults to on; use --skip-reconnect to disable.)
-s, --silent Be more silent. Print results with a tab as separator,
each row on new line.
--shared-memory-base-name=name
Base name of shared memory.
-S, --socket=name The socket file to use for connection.
--server-public-key-path=name
File path to the server public RSA key in PEM format.
--get-server-public-key
Get server public key
--ssl-mode=name SSL connection mode.
--ssl-ca=name CA file in PEM format.
--ssl-capath=name CA directory.
--ssl-cert=name X509 cert in PEM format.
--ssl-cipher=name SSL cipher to use.
--ssl-key=name X509 key in PEM format.
--ssl-crl=name Certificate revocation list.
--ssl-crlpath=name Certificate revocation list path.
--tls-version=name TLS version to use, permitted values are: TLSv1.2,
TLSv1.3
--ssl-fips-mode=name
SSL FIPS mode (applies only for OpenSSL); permitted
values are: OFF, ON, STRICT
--tls-ciphersuites=name
TLS v1.3 cipher to use.
-t, --table Output in table format.
--tee=name Append everything into outfile. See interactive help (\h)
also. Does not work in batch mode. Disable with
--disable-tee. This option is disabled by default.
-u, --user=name User for login if not current user.
-U, --safe-updates Only allow UPDATE and DELETE that uses keys.
-U, --i-am-a-dummy Synonym for option --safe-updates, -U.
-v, --verbose Write more. (-v -v -v gives the table output format).
-V, --version Output version information and exit.
-w, --wait Wait and retry if connection is down.
--connect-timeout=# Number of seconds before connection timeout.
--max-allowed-packet=#
The maximum packet length to send to or receive from
server.
--net-buffer-length=#
The buffer size for TCP/IP and socket communication.
--select-limit=# Automatic limit for SELECT when using --safe-updates.
--max-join-size=# Automatic limit for rows in a join when using
--safe-updates.
--show-warnings Show warnings after every statement.
-j, --syslog Log filtered interactive commands to syslog. Filtering of
commands depends on the patterns supplied via histignore
option besides the default patterns.
--plugin-dir=name Directory for client-side plugins.
--default-auth=name Default authentication client-side plugin to use.
--binary-mode By default, ASCII '\0' is disallowed and '\r\n' is
translated to '\n'. This switch turns off both features,
and also turns off parsing of all clientcommands except
\C and DELIMITER, in non-interactive mode (for input
piped to mysql or loaded using the 'source' command).
This is necessary when processing output from mysqlbinlog
that may contain blobs.
--connect-expired-password
Notify the server that this client is prepared to handle
expired password sandbox mode.
--compression-algorithms=name
Use compression algorithm in server/client protocol.
Valid values are any combination of
'zstd','zlib','uncompressed'.
--zstd-compression-level=#
Use this compression level in the client/server protocol,
in case --compression-algorithms=zstd. Valid range is
between 1 and 22, inclusive. Default is 3.
--load-data-local-dir=name
Directory path safe for LOAD DATA LOCAL INFILE to read
from.
--fido-register-factor=name
Specifies authentication factor, for which registration
needs to be done.
--oci-config-file=name
Specifies the location of the OCI configuration file.
Default for Linux is ~/.oci/config and %HOME/.oci/config
on Windows.
Default options are read from the following files in the given order:
C:\WINDOWS\my.ini C:\WINDOWS\my.cnf C:\my.ini C:\my.cnf C:\Program Files\MySQL\MySQL Server 8.0\my.ini C:\Program Files\MySQL\MySQL Server 8.0\my.cnf
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option file,
except for login file.
--defaults-file=# Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
--defaults-group-suffix=#
Also read groups with concat(group, suffix)
--login-path=# Read this path from the login file.
Variables (--variable-name=value)
and boolean options {FALSE|TRUE} Value (after reading options)
--------------------------------- ----------------------------------------
auto-rehash TRUE
auto-vertical-output FALSE
bind-address (No default value)
binary-as-hex FALSE
character-sets-dir (No default value)
column-type-info FALSE
comments FALSE
compress FALSE
database (No default value)
default-character-set auto
delimiter ;
enable-cleartext-plugin FALSE
vertical FALSE
force FALSE
histignore (No default value)
named-commands FALSE
ignore-spaces FALSE
init-command (No default value)
local-infile FALSE
no-beep FALSE
host (No default value)
dns-srv-name (No default value)
html FALSE
xml FALSE
line-numbers TRUE
unbuffered FALSE
column-names TRUE
sigint-ignore FALSE
port 0
prompt mysql>
quick FALSE
raw FALSE
reconnect FALSE
shared-memory-base-name (No default value)
socket (No default value)
server-public-key-path (No default value)
get-server-public-key FALSE
ssl-ca (No default value)
ssl-capath (No default value)
ssl-cert (No default value)
ssl-cipher (No default value)
ssl-key (No default value)
ssl-crl (No default value)
ssl-crlpath (No default value)
tls-version (No default value)
tls-ciphersuites (No default value)
table FALSE
user root
safe-updates FALSE
i-am-a-dummy FALSE
connect-timeout 0
max-allowed-packet 16777216
net-buffer-length 16384
select-limit 1000
max-join-size 1000000
show-warnings FALSE
plugin-dir (No default value)
default-auth (No default value)
binary-mode FALSE
connect-expired-password FALSE
compression-algorithms (No default value)
zstd-compression-level 3
load-data-local-dir (No default value)
fido-register-factor (No default value)
oci-config-file (No default value)
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Ok Merci !!!! Effectivement je n'avais pas essayer cet méthode. La Ducoup il me demande d'entrer le mot de passe. Puis ça ne me renvoi rien j'imagine que ça a marché.
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
il reste à vérifier dans la table (il me semble que la commande affiche le nombre de lignes impactées, mais je peux me tromper)
Mettre a jour une base de donnée depuis gitHub
× Après avoir cliqué sur "Répondre" vous serez invité à vous connecter pour que votre message soit publié.
× Attention, ce sujet est très ancien. Le déterrer n'est pas forcément approprié. Nous te conseillons de créer un nouveau sujet pour poser ta question.
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'
Seul on va plus vite, ensemble on va plus loin. 'KawaBunga'